Showing posts with label hot rolled steel sheet. Show all posts
Showing posts with label hot rolled steel sheet. Show all posts

Monday, 21 September 2015

Galvanized Steel Sheet Corrosion



               Depending on the applications, steel sheet will need to have an extra layer of protection to help defend corrosion that naturally occurs over time. In order for manufactures and distributors of steel products to ensure the material they are using in their projects will last, the steel is often galvanized. Galvanization is done via a hot dipping method, coating the product in a layer of Zinc.  While the protective coating is designed to further safe-guard the steel sheet’s future, corrosion is a process that is hard to fully avoid. galvanized steel sheet is still susceptible to corroding – whether that be because of natural, chemical or electrochemical conditions.

Galvanized Steel Sheet
                The degree and speed of a steel product’s corrosion depends on a few factors – though in the majority of cases will gradually occur overtime.  The type of steel, the thickness of protective Zinc on the steel sheet, and the product’s environment all play major roles in steel sheet corrosion.

Natural Corrosion

              Galvanized steel sheet that has is exposed to the atmosphere and rainwater is likely to corrode overtime. The product develops a natural carbonate on it that becomes brittle and will eventually crack and split. The split exposes a new layer of zinc that will corrode, and it can even corrode enough to expose the base layer of steel to the atmosphere and its elements. 

Chemical Corrosion

hoesch sheet pile

               Steel sheet that has been galvanized has the ability to resist corrosion from a number of chemicals it comes into contact with including concrete, lead, tin and aluminum. However there are some chemicals that will reduce the products’ protection to corrosion: plaster and cement with chlorides and sulfates, acidic rainwater runoff, zinc plate condensation, moss, lichen, and pooled water on the exterior of the zinc coating.

Electrochemical Corrosion

              Certain electrolytes that come into contact with the zinc layer on galvanized steel sheet can cause an electrolytic reaction.  Some electrolytes that could have an effect include rain, fog, condensation and dew. In order to avoid the reaction, prevent contact between the galvanized steel sheet and electrolytes as much as possible. Another solution is applying paint to the galvanized product to thwart corrosion of the coating of zinc.

Tuesday, 17 February 2015

Cold Rolled Sheet Pile and its Advantages

                       Sheet pile is used in temporary and permanent applications in several different industries. It is used to create a continuous wall that retains soil or water. There are two different manufacturing processes when it comes to sheet pile which include cold formed and hot rolled. Hot rolled sheet pile is created by heating steel to extreme temperatures that is then guided through rollers that squeezes and presses it into a particular shape. Cold formed sheet pile is created by passing steel at a temperature lower than its recrystallization point through rollers. Whether to use cold rolled or hot rolled sheet pile continues to be a widespread debate throughout the industries these products are utilized in.

                      Besides the manufacturing process, the interlock systems of these sheet pile type vary as well. Hot rolled products have an interlock that can be compared to a ball and socket and the cold rolled products have a bent plate interlocking system. Depending on the project, both sheet pile types have benefits and disadvantages when utilized. The following are common advantages of using sheet pile that was cold formed.


Advantages

More product to purchase:
Steel mills manufacture cold rolled sheet pile in greater numbers than the hot rolled products meaning it is much more readily available.  The manufacturing process is easier to manage and in most cases cold rolled sheet pile that is ordered through a leading company should be ready within only a couple of weeks of the date ordered, created to the customer’s exact specification of length and strength.

Cost effective:
The more economical choice when it comes to steel sheet pile is product that has been cold rolled to be produced. The manufacturing process, which is less expensive than the hot rolled process, creates a lightweight product. Its strength to weight ratio reduces overall construction costs.

Cold Rolled Steel Sheet

Lower transportation costs:

Since cold formed sheet pile is readily available from manufactures finding a steel mill that carries the sheet pile you need for a project will be much easier, and you will most likely be able to find a manufacturer close to the job site. This cuts down on delivery and transportation expenses. 

Friday, 12 September 2014

Rolled Steel Products, World Trade Center Twin Towers & the USS New York



Another year has passed since the tragedy that occurred September 11, 2001. Many Americans continue to be affected by the events that took place that day, yet life still goes on.

Same goes for the remnants of rolled steel products used in the 1973 construction of the Twin Towers. Following the collapse of the buildings, portions of steel were recovered and presented to the U.S. Navy for construction of a new ship. The steel was used to construct a 7.5 ton portion of the 25,000 ton San Antonio class, amphibious transport dock ship deemed the USS New York. A beating heart is all that is required to understand the significance of why using WTC steel for construction of a United States warship is so powerful.
  

rolled steel products


Steel: Powerful in Strength and Symbolism

 After the towers collapsed and the dust finally settled, there is one image that will be remembered forever. Where the majestic towers had once stood so high, there was a “small” section of steel wall that had not fallen. Some believed that the piece of wall still standing was a symbol for standing back up after getting knocked down. This section of steel columns, that formed an outer wall for one of the towers, was more than just a pile of rubble. No matter the interpretation, the fact remains that there were still sections of steel that had held true. Looking back at how the steel was constructed really puts into perspective how much energy was unleashed upon collapsing.

cold rolled steel sheet

In order to build two skyscrapers 110 stories each; high-strength, load-bearing steel columns had to constructed. Given the task of providing a support structure for both 110-story monstrosities was a perimeter of 60 columns on each side of the buildings. Overall, 40% less structural steel was used than normal buildings. A tube frame design with a steel core that allowed the buildings to be more responsive in the wind contributed to less steel being used.

Each perimeter wall measured 210 feet and was made of prefabricated modular pieces of steel. Modular pieces consisted of 3 steel columns, 3 stories tall. Connecting these different pieces together were 14 inch steel plates made of hot rolled steel. Located on every floor, plate thickness and strength decreased with height due to less building mass to support on higher floors. If recycling steel from one of the worst tragedies on American soil in history wasn’t enough incentive, the strength of the steel would be plenty.
hot rolled steel sheet

Constructing the USS New York

In 2002, then Secretary of the Navy Gordon R. England declared the next San Antonio class amphibious transport dock ship be named “New York”. New York Governor George Pataki played an instrumental role in acquiring 7.5 tons of steel rubble from Ground Zero for the NAVY so the New York could be constructed. Built by Northrop Grumman Ship Systems, 7 tons of the steel was used for construction of the bow stem. A bow stem is the foremost portion of a ship that cuts through the water and offers hull integrity. The “motto” of the USS New York is simple, “Never Forget”. That is precisely what every American will do every time the USS New York is mentioned and even more importantly, every September 11th till the end of time.